Removing the power steering pump

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Steering Pump

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the power steering pump's 3 x mounting screws through the pulley holes
the connector with holder from the power steering pump.

Fig 2: Identifying Servo And Hoses

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the servo hoses and the engine coolant hoses from their holders/clips. Remove the tie strap for the servo hose by the suspension turret
the expansion tank for the coolant and servo reservoirs from the mounting on the spring strut turret
the connector and place the reservoirs on the engine.

Place the power steering pump on the engine.