Installing the power steering pump
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the power steering pump in the correct position
- the screws, 3x, through the pulley.
Install:
- the auxiliaries belts. Use 9997109 wrench 999 7109
- the connector for the engine coolant level sensor
- the coolant reservoir and the power steering reservoir in their mountings
- the hoses in their holders and clips
- the intake hose for cold air to the control module
Turn the ignition key to position 2.
Connect the battery negative lead to the battery negative terminal.