Applies to all: Installing VVT-control valve
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Clean the gasket faces. Note the cleanliness requirements above.
Install a new gasket .
Install a new control valve. Tighten the control valve crosswise. Tighten to 10 Nm
Connect the connector.
Install the upper timing belt cover.