Installing rubber cover on fuel filler pipe

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Circlips, Rubber Cover Sealing Surface And Drain Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the inner rubber seal is correctly seated and that the drain pipe is inside the inner seal.
Check that circlip (1) is in position.
Lubricate rubber cover sealing surfaces (2) with petroleum jelly.
Install rubber cover (ensure that it is correctly positioned in relation to bodywork).
Install circlip (4) and drain pipe (3).
Connect all connectors and install fuel filler pipe ground lead.
Install rubber bracket around wiring.
Install panels, covers and carpets.