Installing fuel tank

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Holder, Bracket And Fuel Pump Unit Hole

Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the fuel tank so that the front holder can be installed to the bracket by pressing it until it locks into place.
Ensure that cabling routed through the fuel pump (FP) unit hole will not be trapped when the fuel tank is installed.
Raise the fuel tank and fix it to the bodywork.
Install EVAP canister shut-off valve hose in the clamp on the fuel tank.