Starting fuel pump (FP)

WARNING: This page is about a different car, the 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Remove central electrical unit cover.
Remove the fuel pump (FP) relay (pos. 103 in the electrical distribution unit).
Ignition on.

Fig 3: Identifying Fuel Pump Relay Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Connect a cable between relay base terminals 1 and 3.

The fuel pump should start.

OK
Refer to Fault-tracing information
NOT OK
Refer to Checking the power supply to the relay