Install the engine cooling fan (FC)

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Upper Charge Air Pipe, Fresh Air Intake, Upper Fan Shroud, Pressure Pipe And EVAP Canister Shut-Off Valve

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove shroud ( 9995474 ) from radiator.

Lift out the engine cooling fan (FC) with the cover. Connect the connector, clamp the wiring.

Install the upper charge air pipe, between charge air cooler and turbocharger (TC).

Install the fresh air intake.

Install the upper fan shroud. Tighten the fan shroud to the radiator (ensure that the clip is in place.

Connect the pressure pipe (to the turbo instruments).

USA: Connect the vacuum hoses to the EGR-regulator.

Install the EVAP canister shut-off valve in the bracket and connect the canister vacuum hose.