Installing the intake manifold and gasket

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake Manifold

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Make sure that the gasket faces are clean.

Install

a new gasket . The gasket is held in place by the lower screws for the intake manifold.
the intake manifold.
Do not forget the hose for the crankcase ventilation which should be routed up through the gap between the second and third channel
place the pressure pipe between the first and second channel.
the three upper screws.
Tighten all screws starting from the middle.

with 20 Nm .