Replacing the rear seal
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
The following components must be removed when replacing the rear seal:
- the solenoid valves.
Lift out from the air cleaner (ACL) cover.
- the air hose from the air cleaner (ACL) to the turbocharger (TC). Place to one side.
Seal the hose.
- place the air cleaner (ACL) cover to one side.
- the charge air pipe over the engine.
Seal the openings.
- the cover over the ignition coils.
- the upper torque rod bracket.
- the camshaft position (CMP) sensor housing.
- the trigger wheel.