Install the camshaft pulleys

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Pulleys And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fit the upper timing casing

Install the camshaft pulleys, align according to marking.

Tighten the two screws until they just come into contact with the camshaft pulleys.

Remove the upper timing cover.

NOTE:

Check that the camshaft screw holes are centered, see illustration above.

Fig 1: Identifying Camshaft Pulleys And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fit the upper timing casing

Install the camshaft pulleys, align according to marking.

Tighten the two screws until they just come into contact with the camshaft pulleys.

Remove the upper timing cover.

NOTE:

Check that the camshaft screw holes are centered, see illustration above.