Remove tools

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Clutch Driven Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove press tool and counterhold.

Unscrew center screw and remove press tool.
Remove clutch driven plate centering cone.
Slacken off socket and then tap on centering tools with a rubber mallet so expander is released.
Rubber mallet is used so as not to damage threads.

Remove center centering tools.
Slacken off hooks and remove counterhold.
Remove gear sector locking flywheel.