Installing the fuel rail

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Rail And Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

the fuel rail. Use new screws.

Press the quick-release connector for the fuel pressure line until it clicks.

the clamp for the injector wiring at the rear of the cylinder head
the protective cover over the injector connectors
the charge air pipe over the engine. Tighten the pipe using the three screws on the engine. Tighten the clamps.