Installing the gearbox cable bracket on the gearbox and the cables on the levers

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Gearbox Cables And Levers On Gearbox

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the bracket and the screws. Tighten to 25 Nm
the cable on the bracket. Secure it with the locking
the lever on the gearbox. Tap in the expander pin
the mechanical cables on the levers. Check the marking
the connector.