Measuring lateral run-out in hub: Preparations
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Get measurement tool set 9995418 .
- Remove brake caliper and brake pads as per Removing brake caliper and brake pads or Removing brake assembly . Then continue as below.
NOTE:
Mark brake disc up against hub so disc can return to its old position when installing.