Removing both the front wheels. Removing the control arms, the tie rod, the brake pipe bracket and the screw for the drive shaft on both sides
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Link For Anti-Roll Bar, Tie Rod From Wheel Spindle, Screw For Brake Pipe Bracket, Screw For Drive Shaft
Remove:
- the link for the anti-roll bar up at the spring strut
- the tie rod from the wheel spindle. Use puller 9995259
- the screw for the brake pipe bracket
- the screw for the drive shaft.