LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Transmission - Removal, Replacement And Installation (Coupe)) >> Replacing The Transmission (B5234T3, M56; 2002) >> Transmission, installing >> Installing the transmission >> Installing the right drive shaft on the gearbox

Installing the right drive shaft on the gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rubber Seal On Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the rubber seal is in position on the constant velocity joint.

Fig 2: Identifying Bearing Cap
GLL108665Courtesy of VOLVO CARS OF NORTH AMERICA.
CAUTION:

Take care not to damage the sealing ring in the transmission or the boot on the drive shaft.

Install the bearing cap. Tighten to 25 Nm  .

scientia non olet · About LEMON Manuals