Installing the five screws between the gearbox / engine and the gearbox / starter motor

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Screws For Gearbox And Engine

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten the screws for the gearbox and engine. Tighten to 50 Nm . Tighten the screws for the gearbox and starter motor. Tighten to 40 Nm .

Install the cable duct on the gearbox.