LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Transmission - Removal, Replacement And Installation (Coupe)) >> Replacing The Transmission (B5234T3, M56; 2002) >> Removing the transmission >> Removing the transmission >> Removing the right drive shaft

Removing the right drive shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Plug
GLL109113Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the bearing cap.

Pull out the inner section of the drive shaft. At the same time fold out the spring strut.

CAUTION:

Take care not to damage the seal in the transmission.

Install sealing plug 9995488 .

Let the drive shaft rest on the sub-frame and oil pipes.

Fig 2: Identifying Rubber Seal On Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.
CAUTION:

Later models have a rubber seal on the constant velocity joint. Do not damage the seal. It will be needed for installation.

scientia non olet · About LEMON Manuals