Checking communication with the ABS system

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition on

Fig 2: Identifying Scan Tool
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Volvo Scan Tool (ST) connected to data link connector (DLC).
  Establish communication with the ABS system by reading off a value in the scrolling values.

Has communication with the ABS system been established?

YES
Refer to Check the communication cable, power supply and ground for RTI control module
NO
Refer to Checking the communication cable