Installing mechanical cable

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bending Hook To Side And Removing End Of Cable From Opener

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the wire end (2) onto the guide (3) before pressing the end of the wire sheathing (1) home in the door opening module. Make sure that the hook (5) engages properly.

Remove cover (4) when the end of the wire sheathing (1) is fixed firmly in place. Check that the wire end (2) can run freely.

Check the operation of the lock, without closing the door.

Fit the interior door handle.