Checking for open-circuit

Check circuit between fuse number 11C/4 and battery positive terminal for an open-circuit according to Open-circuit, permanent faults

Fig 1: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification 

Check cable between fuse 11C/4 and control module terminal #5 for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Control Module Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification 

Check the circuit between battery positive terminal and fuse 11C/8 for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification 

Check cable between fuse 11C/8 and control module terminal #6 for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Control Module Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification 

Check the cable between control module terminal #8 and ground terminals 31/51 and ground terminal itself for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Control Module Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohms Display

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification