Cleaning and greasing the camshaft position (CMP) sensor connector

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Switch OFF Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Disconnected

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Disconnect the camshaft position (CMP) sensor.
Check camshaft position (CMP) sensor connector for contact resistance and oxidation and remedy according to Contact resistance and oxidation .
- Connect the camshaft position (CMP) sensor.
Fig 3: Identifying Connector Cleaned/Checked
Courtesy of VOLVO CARS OF NORTH AMERICA.