Installing the EVAP Canister
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
In reverse order.
Tighten the bolts. Tighten bolts to 25 Nm. Tighten nuts to 20 Nm.
Ensure that the EVAP canister:
- engages in the catch at the front
- engages in its groove in the bracket.
NOTE:
Use a new screw clip. See replacement parts catalog. Check that the outlet/inlet connector catches engage.