Injector/pulse damper, replacement: Finishing

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press the fuel rail down. Ensure that all injectors locate correctly.

Screw the fuel rail into place. Use new screws . Tighten to 10 Nm .

Press the quick-release connector together until a clicking sound is heard.

At the same time connect all the connectors to the injectors.

Reinstall the cover over the fuel rail.

Start the engine. Check for fuel leakage.