LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Variable Valve Timing Unit - Checking & Adjusting (Coupe)) >> Engine >> Variable valve timing unit, checking and adjusting (B5XX4TX (2002-) and B5244S6) >> Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft >> Installing the crankshaft adjustment tool

Installing the crankshaft adjustment tool

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Starter Motor
GLL108757Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the mounting screws for the starter motor.

Pull out the starter motor and place it to one side.

Remove the blind cover plug from the hole for the adjustment tool.

Turn the crankshaft clockwise slightly.

Install: 9995451 . Ensure that the tool bottoms out against the cylinder block.

scientia non olet · About LEMON Manuals