Removing engine compartment components

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Underhood Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the engine cover
the engine stabilizer brace between the suspension turrets and the engine
the air cleaner (ACL) housing assembly with the intake pipe.

Unhook the turbocharger (TC) control valve from the air cleaner (ACL) housing.

Pull the air cleaner (ACL) housing out of its mountings.

Fig 2: Identifying Engine Hoses

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the charge air pipe for the turbocharger (TC). Leave the hose in place on the turbocharger (TC)
the hose between the intake manifold and the charge air cooler (CAC) from the intake manifold. Move the hose to one side
the clamps for the cable harness on the engine
the nut for the rear engine pad. Leave the nut in place on the engine pad by a few threads.

Disconnect the inner of the two hose couplings from the connecting sleeve for the passenger compartment heater in the firewall.