Installing the solenoid valve: Notes

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before installation, check that the pipe ends and connections are undamaged.

NOTE:

Tighten the pipe couplings. See Tightening pipe connections .

Install:

the valve. Use thread sealant 116 1056 . Tighten to 80 Nm , while correctly positioning the valve
the solenoid
the screw for the solenoid
the connector
the gas pipe
check for leakage. See Gas pipe, checking for leaks
The guard for the gas tank.

Connect the connector in the cargo compartment.