Installing the pressure hose

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Screw, Lock Bracket & Pipe Coupling Area At Power Steering Pump

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten the screw clip on the sub-frame. Tighten to 10 Nm .

Install:

the pipe nipple in the pump. Tighten to 25 Nm
the lock bracket (2).

Tighten the screw (1). Tighten to 24 Nm .

NOTE:

There may be a gap (3) of a few millimeters between the pipe coupling and the power steering pump. Bend the bracket so that the twelve edged mounting on the bracket is on the nut.