Setting The Contact Reel To Zero
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
If the locking screw is not in the lock position as in the figure, set the contact reel to zero. For setting to zero see Resetting SRS contact reel .
NOTE:
The new contact reel is set to zero when delivered with locking screws in locked position.
Reset means steering wheel can be turned all the way in both directions without damaging contact reel.