Install the Drive Shaft In the Gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking Drive Shafts

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Ensure that a new expander ring is used.

Remove the seal plug.

Install the drive shaft in the gearbox.

CAUTION: Do not damage the drive shaft boot and sealing ring in the gearbox. Press in the drive shaft properly. Check that the drive shaft is properly locked into place in the differential gear. Do this by carefully pulling the drive shaft constant velocity joint.