Reset the Parking Brake To the Zero Position
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install a hose with an inner diameter of 5 mm on the end of the friction spring (1). Open the friction spring so that the primary cable runs freely.
Use a pipe wrench to push back the primary cable mounting (2). Insert a 6.5 mm locking pin into the hole in the pedal (3) (it must pass through the bracket, cable pulley, pedal and the other bracket).