Removing the Drive Shaft From the Transmission
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Only applies to cars with AW55-50 or AW50AWD transmissions.
Use jimmy bar 9995462 B.
Turn the constant velocity joint housing so that the jimmy bar is as far into the joint as possible.
Remove the drive shaft from the transmission. Ensure that the end of the drive shaft does not damage the seal.