Working on jacked up car

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Protective Covers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Jack car up.
Remove both front protective cover bolts. Push cover forwards so that guide at rear comes loose. Undo cover at front.
Remove protective cover under engine (some models only).

Fig 2: Identifying Cable Pipe Mounting Bolt And Bolt To Negative Lead Terminal On Frame Beam

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

cable pipe mounting bolt from subframe. Unhook pipe from frame.
bolt to negative lead terminal on frame beam.

In cars with turbo:

Undo turbocharger air pipe from hose connection at lower intercooler connection.