Power Brake Booster LHD Cars, Replacement: Installing
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Install O-ring on power brake booster.
- Install power brake booster.
- Connect support bracket to brake pedal and install locking spring.
- Install the four mounting nuts, tighten to 25 Nm (17 ft. lb).
- Install master cylinder.
- Install bracket with hydraulic unit as per Hydraulic Unit, Replacement . Then continue as below.