Hydraulic Unit, Replacement: Notes
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Hydraulic unit must be replaced as a complete unit. Hydraulic unit must not be opened under any circumstances. Reassembling it requires special equipment and facilities.
The hydraulic unit, reducing valve and control module are on the same bracket in the engine compartment. If hydraulic unit has to be changed, the whole bracket must be removed first before the hydraulic unit can be removed from its mounting.