Installing cable

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Insert new cable through the floor from outside.
Install cable front end in parking brake mechanism.
Install clips on floor and install run-through.
Install mat and fix in place.
Install rear seat in car.

Fig 1: Identifying Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that parking brake cable O-ring and guide sleeve are OK.
Install guide sleeve to cable and install cable end in grip on expander.
Pinch grip on expander around cable with a pair of pliers.
Install cable guide sleeve to carrier arm endpiece with bolt and bracket.
Install mounting bolt in front of rear wheel arch.