Remove the integrated relay/fusebox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Integrated Relay Fuse Box Bracket Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the integrated relay/fuse box bracket screw. Lift it up and put to one side. Tie it up using a cable.

Remove the brake pipes between the master cylinder and the ABS unit

Fig 2: Brake Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Clean the brake pipes terminals at the master cylinder and ABS unit.

Place paper under the master cylinder to avoid brake fluid spillage.

Remove the brake pipes from the master cylinder and ABS unit. Install sealing plugs.

Remove the brake pipes.