Install the cable holder and plastic cap

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Plastic Cap And Cable Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the cable holder. Tighten the nuts, Tighten to 10 Nm
the positive cable and integrated relay/fusebox nut. Tighten to 25 Nm
the screw on the clamp around the positive cable
the plastic cap at the positive cable.