Remove the Hose For the Clutch Cylinder

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Fluid Reservoir And Clutch Slave Cylinder Hose Blocked Using Hose Pliers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Block the hose between the brake fluid reservoir and clutch slave cylinder. Use hose pliers.

Remove the retaining clip from the clutch pipe junction.

Remove the pipe from the junction and from the clip in the side member.

NOTE: Seal the openings against contamination. Wipe up any spilled brake fluid.