LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Transmission - Clutch, Lubrication, Gear-Shift Position (Coupe)) >> Removal & Installation >> Transmission, Removing (Diesel Engines) >> Replacing Drive Shafts Boots >> Cleaning/Checking the Outer Constant Velocity Joint >> Mark Up the Outer Ring On the Outer Constant Velocity Joint, the Ball Holder And the Inner Ring In Relation To Each Other. Use An Electric Scriber

Mark Up the Outer Ring On the Outer Constant Velocity Joint, the Ball Holder And the Inner Ring In Relation To Each Other. Use An Electric Scriber

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Marking Outer Ring Of Outer Constant Velocity Joint, Bearing Race, And Inner Ring In Relation To Each Other
GLL108677Courtesy of VOLVO CARS OF NORTH AMERICA.