Removing the drive shaft
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
Take hold of the drive shaft. Pull it out of the transmission.
Unhook the servo and the evaporator lines from the holders on the right-hand side of the sub-frame.
Also unhook the servo line from the clip on the sub-frame.