Removing the Screws For the Torque Rod From the Transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Rod Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the screw for the front engine pad
the three screws for the transmission/engine. One screw is positioned above the ground lead in the transmission
the oil pipe from the transmission.

Plug the transmission and pipe.

Remove the 2 screws for the dip stick pipe.

Clear up any oil spill.