Removing Bevel Gear

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Angle Gear Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Only applies to vehicles equipped with AWD.

Remove the angle gear screws, 5. Pull the angle gear straight out from the gearbox.

Hang the angle gear up in an oil pipe to the turbocharger or similar for example.

Fig 2: Angle Gear Hung Up In An Oil Pipe To The Turbocharger

Courtesy of VOLVO CARS OF NORTH AMERICA.