Tightening the Sub-Frame Screws (Both Sides)
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install the four subframe screws together with the subframe brackets and engine heater where appropriate.
Tighten to: Tightening torque . First tighten the screws on the left-hand side of the subframe followed by those on the right.
Tighten the bracket screws M10.
Tighten the screws, 4 x M10, to the subframe brackets.