Removing the screws from the torque converter

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Torque Converter Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 6 screws for the torque converter.

Turn the engine. Use a socket and ratchet. Pull out the right-hand fender liner slightly to access the crankshaft nut more easily.

Use a Torx TX 50 socket on the torque converter screws.