Removing the Drive Shaft From the Wheel Hub

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Out Spring Strut And Removing Drive Shaft From Hub

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull out the spring strut and remove the drive shaft from the hub. Hold the spring strut to one side using a tensioning strap for more space when removing the drive shaft.

CAUTION: On later version cars, there is a rubber seal on the outer constant velocity joint. Do not damage the seal. It will be needed for installation.