LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Transmission - Adaptation (Coupe)) >> Adaptation & Adjustment >> Diagnostics/Check List (All Others) >> Drive Shaft Left, Replacing >> Installing the Drive Shaft >> Align the Drive Shaft In the Hub And the Spring Strut In the Wheel Spindle

Align the Drive Shaft In the Hub And the Spring Strut In the Wheel Spindle

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rubber Seal On Constant Velocity Joint
GLL106610Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the rubber seal is in position on the constant velocity joint.

Fig 2: Screws And Lock Nuts For Wheel Spindle And Spring Strut
GLL109238Courtesy of VOLVO CARS OF NORTH AMERICA.

Use new screws and lock nuts for the wheel spindle and spring strut. Tighten to light contact.

scientia non olet · About LEMON Manuals