Checking for leaks using a leak tracer

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Leak Tracer Special Tool 951-2761

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the gas pressure is at least 100 Bar (10000 kPa), i. e. at least 1/2 tank.

Start the engine and let it run until it runs on gas.

Switch off the engine.

Empty the gas pipes.

Start the engine and let it run until it runs on gas.

Check all connections that were detached. Use leak tracer 9512761 .

NOTE:

In the event of leakage, dismantle the coupling and assemble in accordance with the specification. Check for leakage.