Shutting off the misfire diagnostic

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Misfire diagnostics are shut off in the event of

driveline oscillations.
Drive line oscillations, caused by uneven road surfaces for example, may lead to uneven engine operation. Drive line oscillations will be posted by the ABS system and this information is sent to the engine control module (ECM). The engine control module (ECM) uses this information in order to differentiate between oscillations and actual misfiring and the diagnostic is shut off.
diagnostic trouble codes (DTCs) in the flywheel sensor, mass air flow (MAF) sensor, ABS and camshaft position (CMP) sensor.