Install new bearing and new circlip

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pilot Bearing And Circlip Pressed On Using Special Tools

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use tool 9995491 as a support on circlip side.

Position handle 9991801 at base of constant velocity joint and press on pilot bearing and circlip.

Check that pilot bearing is fully home to its contact surfaces.